Baltic Birch Plywood
Posted: Mon Feb 16, 2015 2:41 pm
I've found this at Southern Lumber in San Jose. It comes in 5x5 foot sheets 3mm (1/8th inch) for about $18. I have them cut the boards into 24 inch strips so that they fit in my car. I then cut the strips into 24x18 panels at TechShop. The price per panel is about $2.50
It also comes in 6mm sheets.
I've found that the glue in this plywood makes it harder to cut.
Settings for 3mm
45watt: speed 8, power 90, frequency 500. If the laser is really clean then speed can go up to 12.
Settings for 6mm
It also comes in 6mm sheets.
I've found that the glue in this plywood makes it harder to cut.
Settings for 3mm
45watt: speed 8, power 90, frequency 500. If the laser is really clean then speed can go up to 12.
Settings for 6mm