Styrene
Posted: Mon Feb 16, 2015 2:42 pm
I've used 1/32 inch material from Tap Plastics. It formed easily and with very good detail.
I set the heaters to 3 and the plastic was ready in about 30 seconds.
I bought the material at Tap Plastics. They charge $2.15 per square foot; sheet cost $6.00.
I set the heaters to 3 and the plastic was ready in about 30 seconds.
I bought the material at Tap Plastics. They charge $2.15 per square foot; sheet cost $6.00.