Problems when cutting

Site Admin
Posts: 34
Joined: Sat Feb 14, 2015 11:46 pm

Problems when cutting

Postby jschrempp » Tue Feb 24, 2015 12:48 am

If your wood part smokes, then either increase the feed rate or slow the spindle RPM.

If you hear screeching, they you are feeding to fast - or too slow. Try slowing the feedrate first. If that doesn't work, then increase the feed rate a bit.

Return to “Shopbot and Tormak”

Who is online

Users browsing this forum: No registered users and 1 guest